Aggregates :
Test including Chloride content, Sulphate content, Acid soluble material content, Soundness and Potential reactivity etc.
總計：
測試包括氯化物含量，硫酸鹽含量，酸溶性物質含量，健全性和潛在反應性等。
Admixtures : Test including Ash content, Dry material content, Relative density, Chloride content, pH value, Alkali content and Sulphate content etc.
混合物：包括灰分含量，乾物質含量，相對密度，氯化物含量，pH值，鹼含量和硫酸鹽含量等的測試。
Cement, PFA, GGBS, Silica Fume : Test including Loss on ignition, Sulphate content, Chloride content, Silicon dioxide content, Calcium oxide content, Magnesium oxide content, Iron (III) oxide content, Aluminium oxide content and Free calcium oxide content etc.
260/5000
水泥，PFA，GGBS，二氧化矽煙氣：包括灼燒失重，硫酸鹽含量，氯化物含量，二氧化矽含量，氧化鈣含量，氧化鎂含量，氧化鐵（III）含量，氧化鋁含量和游離氧化鈣含量等的測試。
Concrete, Mortar :
Test including Cement and aggregate content, Chloride content, Sulphate content and Original water content etc.
混凝土，砂漿：
測試包括水泥和骨料含量，氯化物含量，硫酸鹽含量和原始含水量等。
Copper and copper alloys :
Test including Aluminium, Arsenic, Antimony, Cadmium, Chromium, Iron, Lead. Magnesium, Manganese, Nickel, Phosphorus, Silicon, Sulphur, Tin, Zinc, Copper, Silver and Carbon content etc.
銅和銅合金：
測試包括鋁，砷，銻，鎘，鉻，鐵，鉛。 鎂，錳，鎳，磷，矽，硫，錫，鋅，銅，銀和碳含量等。
Steel and Iron (Including carbon steel, low alloy steel and stainless steel etc.) :
Test including Aluminium, Carbon, Chromium, Copper, Manganese, Molybdenum, Nitrogen, Niobium, Nickel, Phosphorus, Silicon, Titanium, Vanadium content and Mass per unit area of zinc coatiog etc.
鋼鐵（含碳鋼，低合金鋼和不銹鋼等）：
測試包括鋁，碳，鉻，銅，錳，鉬，氮，鈮，鎳，磷，矽，鈦，釩含量和每單位面積鋅塗層的質量等。
Tin and tin alloys (Solder alloy) :
Test including Cadmium, Lead and Nickel content etc.
錫和錫合金（焊料合金）：
測試包括鎘，鉛和鎳含量等
Water and Wastewater :
Test including pH, Alkalinity, Alkali content, Chloride content, Sulphate content, Total solid content, Total dissolve solid content, Total suspended solid content, COD, metals (Cd, Cr, Fe, Ni & Pb) content, Color, conductivity, Turbidity and chlorine (total residual) etc.
水和廢水：
包括pH，鹼度，鹼含量，氯化物含量，硫酸鹽含量，總固體含量，總溶解固體含量，總懸浮固體含量，COD，金屬（Cd，Cr，Fe，Ni＆Pb）含量，顏色，電導率，濁度 和氯（總殘留）等。
Prev
Next
On site non-destructive test of Pb content of solder alloys, and Cr, Mo & Ni content of stainless steel by Portable XRF.
現場無損檢測
使用便携式X線熒光光譜儀到現場進行無損檢測焊料的鉛含量，以及不銹鋼中鉻、鉬和鎳的含量，可以快速判定焊料和不銹鋼的質量。
On site non-destructive test of Pb content of solder alloys, and Cr, Mo & Ni content of stainless steel by Portable XRF.
現場無損檢測
使用便携式X線熒光光譜儀到現場進行無損檢測焊料的鉛含量，以及不銹鋼中鉻、鉬和鎳的含量，可以快速判定焊料和不銹鋼的質量。
Prev
Next
Total sulfur content of diesel, in accordance with ASTM D2622-16. The test has been accredited by HOKLAS, and complies with the test requirement of EPD for Ultra Low Sulphur Diesel.
- 柴油中總硫含量的測定
根據標準方法 ASTM D2622-16，採用波長色散X線熒光光譜儀測定柴油中總硫的含量。該測試方法已取得香港認可處－香港實驗所認可計劃的認可，亦符合環保署有關超低硫柴油檢測方法的要求。
Total sulfur content of diesel
柴油中總硫含量的測定
Total sulfur content of diesel
柴油中總硫含量的測定
Total sulfur content of diesel
柴油中總硫含量的測定
Total sulfur content of diesel
柴油中總硫含量的測定
Prev
Next
Chemical analysis of stainless steel of Grade 304, 316, 317 & 321, in accordance with BS EN 10315 : 2006. The test method has been accredited by HOKLAS.
Coordinate with the standard test method of BS EN ISO 15350 and BS EN ISO 15351, it is fully comply with the test requirement of stainless steel of Building Department which the test methods all are listed on CEN/TR 10261.
不銹鋼的化學分析
根據標準方法BS EN 10315:2006，採用波長色散X線熒光光譜儀測定不銹鋼（包括304，316，317和321）中鉻、錳、鉬、鎳、磷和硅的含量。該測試方法已取得香港認可處－香港實驗所認可計劃的認可。
Chemical analysis of stainless steel of Grade 304, 316, 317 & 321, in accordance with BS EN 10315 : 2006. The test method has been accredited by HOKLAS.
Coordinate with the standard test method of BS EN ISO 15350 and BS EN ISO 15351, it is fully comply with the test requirement of stainless steel of Building Department which the test methods all are listed on CEN/TR 10261.
不銹鋼的化學分析
根據標準方法BS EN 10315:2006，採用波長色散X線熒光光譜儀測定不銹鋼（包括304，316，317和321）中鉻、錳、鉬、鎳、磷和硅的含量。該測試方法已取得香港認可處－香港實驗所認可計劃的認可。
Chemical analysis of stainless steel of Grade 304, 316, 317 & 321, in accordance with BS EN 10315 : 2006. The test method has been accredited by HOKLAS.
Coordinate with the standard test method of BS EN ISO 15350 and BS EN ISO 15351, it is fully comply with the test requirement of stainless steel of Building Department which the test methods all are listed on CEN/TR 10261.
不銹鋼的化學分析
根據標準方法BS EN 10315:2006，採用波長色散X線熒光光譜儀測定不銹鋼（包括304，316，317和321）中鉻、錳、鉬、鎳、磷和硅的含量。該測試方法已取得香港認可處－香港實驗所認可計劃的認可。
Prev
Next
Chemical analysis of carbon and low alloy steel by XRF (Including Cr, Cu, Mn, Mo, Ni P, Si & V). The test method has been accredited by HOKLAS, and comply with the test requirement of CS2 : 2012 for chemical analysis of reinforcement bar. It is a quick test method for above elements.
碳素鋼和低合金鋼的化學分析
採用波長色散X線熒光光譜儀測定碳素鋼和低合金鋼的化學成分（包括鉻、銅、錳、鉬、鎳、磷、硅和釩）。該測試方法已取得香港認可處－香港實驗所認可計劃的認可，亦符合香港建築標準CS2：2012對鋼筋化學分析的要求。是快速準確檢測上述元素的又一方法。
Chemical analysis of carbon and low alloy steel by XRF (Including Cr, Cu, Mn, Mo, Ni P, Si & V). The test method has been accredited by HOKLAS, and comply with the test requirement of CS2 : 2012 for chemical analysis of reinforcement bar. It is a quick test method for above elements.
碳素鋼和低合金鋼的化學分析
採用波長色散X線熒光光譜儀測定碳素鋼和低合金鋼的化學成分（包括鉻、銅、錳、鉬、鎳、磷、硅和釩）。該測試方法已取得香港認可處－香港實驗所認可計劃的認可，亦符合香港建築標準CS2：2012對鋼筋化學分析的要求。是快速準確檢測上述元素的又一方法。
Prev
Next
Microbiological test of Total Coliform, Faecal Coliform, E. coli and Heterotrophic Plate count. All of these test items have been accredited by HOKLAS.
微生物檢測
檢測水中的總大腸桿菌、糞大腸桿菌、埃希氏桿菌和異養菌平皿計數。這些項目均已取得香港認可處－香港實驗所認可計劃的認可。
Microbiological test of Total Coliform, Faecal Coliform, E. coli and Heterotrophic Plate count. All of these test items have been accredited by HOKLAS.
微生物檢測
檢測水中的總大腸桿菌、糞大腸桿菌、埃希氏桿菌和異養菌平皿計數。這些項目均已取得香港認可處－香港實驗所認可計劃的認可。
Prev
Next
Physical examination and chemical test in tap water
Color, Conductivity, Turbidity, pH, Total residual chlorine, Free residue chlorine and heavy metals by ICP-MS (Including Al, As, B, Sb, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Se & Hg).
All of these test items have been accredited by HOKLAS, and comply with the test requirement of WSD.
檢測自來水的物理、化學參數和重金屬含量
檢測自來水的物理和化學參數，包括色度、電導率、混濁度、酸鹼度、總餘氯和游離餘氯。
採用電感耦合等離子體質譜儀檢測自來水的重金屬含量，包括鋁、砷、硼、銻、鎘、鉻、銅、鐵、錳、鎳、鉛、硒和汞。
以上項目均已取得香港認可處－香港實驗所認可計劃的認可，亦符合水務署對自來水水質檢測的要求。
Physical examination and chemical test in tap water
Color, Conductivity, Turbidity, pH, Total residual chlorine, Free residue chlorine and heavy metals by ICP-MS (Including Al, As, B, Sb, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Se & Hg).
All of these test items have been accredited by HOKLAS, and comply with the test requirement of WSD.
檢測自來水的物理、化學參數和重金屬含量
檢測自來水的物理和化學參數，包括色度、電導率、混濁度、酸鹼度、總餘氯和游離餘氯。
採用電感耦合等離子體質譜儀檢測自來水的重金屬含量，包括鋁、砷、硼、銻、鎘、鉻、銅、鐵、錳、鎳、鉛、硒和汞。
以上項目均已取得香港認可處－香港實驗所認可計劃的認可，亦符合水務署對自來水水質檢測的要求。
Prev
Next
聯絡人：林先生—化學測試技術經理
部門直線電話：2185 0924
部門電子郵件 : chem@qtc-hk.com
公司地址： 新界火炭山尾街 19 – 25 號宇宙工業中心 B 座 9 樓 E & F 室。
化學測試部：香港新界沙田山尾街 31-41 號華樂工業中心 II 期 9 樓 E2 室
微生物實驗室：香港新界沙田山尾街 31-41 號華樂工業中心 II 期 21 樓 E5 室